Vision HDQ™ Video Processor
The Vision HDQ™ significantly enhances the quality of the video signal from a variety of analog and digital, low and high-definition sources and creates the ultimate visual experience.
The Vision HDQ Video Processor provides exceptional deinterlacing and scaling. It allows output timing to be precisely tuned to the projector's, or High-definition Television's (HDTV), optimal configuration.
The Vision HDQ is ISF certified and provides multi-point gamma adjustment and calibration features.
Overview
The VisionHDQ™ Video Processor provides a cornerstone for the ultimate home theater or professional A/V video presentation. The HDQ provides input switching, deinterlacing, digital filtering, signal processing, and detail enhancing scaling resulting in improved video resolution and detail.
Ten inputs provide compatibility with most video sources including digital SDI sources. The DVI-D or DVI-A output has selectable resolutions to 1080p providing a high resolution output signal for both analog displays or digital DVI or HDMI displays.
The VisionHDQ provides unprecedented output and input calibration capabilities with its internal configuration memories. Eight independent output and four input configurations are possible. It further features an 11 point gamma/greyscale calibration capability along with black level, white level, and color & hue adjustments.
Features
Vision-HDQ Vision High Definition Video Processor Features:
Ten inputs (1 Composite, 2 S-Video, 2 SD/HD analog, 4 DVI-I, and 1 SDI) All video processing features are supported for HDCP encrypted DVI-D inputs All video processing features are supported for HD analog YPBPR and RGB inputs Component/RGB analog and DVI-D input accept 720p and 1080i sources Transcoding is supported for both digital and analog SD and HD inputs Per-pixel motion-adaptive video deinterlacing for SD and HD source sources 3:2, 3:3 and 2:2 film pull-down frame-reconstruction for SD sources 3:2, 3:3 and 2:2 film pull-down frame-reconstruction for HD sources Four independent configuration memories for each input Black-level, contrast, calibration per memory Color, red-color-offset, green-color-offset calibration per memory Hue, red-Hue-offset, green-Hue-offset calibration per memory Y/C delay calibration with independent CB and CR delay Detail enhancing scaler Output resolution from 480p to 1080p, plus 1080i Output width programmable in pixel increments Programmable output color format (SD and HD component, plus RGB) Programmable vertical refresh rate Programmable screen aspect ratio DVI-D output with HDCP encryption support BNC connectors for the analog output Backlit infrared remote control with on-screen menu system RS232 serial interface for control and software-updates Silent operation (no fan) Specifications
| Inputs: | |
| Ten Standard Inputs: | One composite, two S-Video, two SD/HD component/RGB, four DVI-D/ DVI-A inputs and one SDI input |
| Composite, S-Video & component inputs: | Support NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L) |
| Component input color-space: | Can be selected as SDTV or HDTV |
| Absolute maximum rating: | ±2 volts, referenced to case ground, for analog video inputs |
| Processing: | |
| Per-pixel motion adaptive deinterlacing and inverse-telecine for SD and HD sources | |
| Proprietary scaling algorithms provide detail-enhancement | |
| Adjustments for sizing, black-level, contrast, color, Hue, color/Hue offset, and Y/C delay | |
| 11-point parametric grayscale and gamma calibration | |
| Source aspect ratio selection of 4:3, 4:3 nonlinear-stretch, letterbox, 16:9 and 1.85 | |
| Supports two zoom steps for each source aspect ratio | |
| Four independent configuration memories per input | |
| Output: | |
| DVI-D/HDCP and analog outputs to 1920 by 1080 at up to 60 Hertz | |
| The analog output supports RGB and YPRPB. Both formats support bi-level and tri-level sync. RGB also supports discrete horizontal and vertical, or discrete composite, sync with programmable polarities. | |
| YPrPb output color-space can be selected as SDTV or HDTV | |
| For red, green, blue and Luma, the nominal output is 1.0 volts peak-to-peak with embedded sync, and 0.7 volts. For PR and PB, the peak-to-peak is 0.7 volts, including sync. Output levels are specified driving an external 75-ohm load. | |
| Discrete sync outputs drive TTL levels into an external 75 ohm load | |
| Eight independent output configuration memories are supported | |
| Resolution is programmable from 480p to 1080p in scanline increments, plus 1080i | |
| Vertical refresh rate is programmable from 48 to 120 Hertz in steps of 0.01 Hertz. This varies with resolution | |
| Output aspect ratio is programmable from 1.33 to 2.35 in steps of 0.01 | |
| Output size and position are programmable in pixel increments | |
| Miscellaneous: | |
| Menu based setup | |
| Infrared remote, or RS232 serial control interface | |
| Power consumption: | 25 watts nominal |
| Power supply input rating: | From 100 to 240 volts at 47 to 63 Hertz |
| Silent operation: | No fan |
| Hardware: | |
| Power Supply: | 5.0 VDC at 5.0 A |
| Remote Control: | Supplied |
| Weight and Size (approximate): unpacked | |
| Weight: | 7 pounds |
| Size: | 3.5 inches x 17 inches x 10 inches (HWD) |
| phone 1.800.736.2673 | International 1.605.339.0100 |
